Scroll to top
© 2017, Norebro theme by Colabr.io Team, All right reserved.
en th

Cambium Networks PTP 820C

Licensed Microwave Radio

Cambium Networks PTP 820C

All-Outdoor / Multi-Core

RADIO

Supported Frequency Range

  • 6-38 GHz

Configurations

  • 1+0 to 4+0, 1+1/2+2 HSB, E/W, 1+0 SD, 2+2 SD

Radio Features

  • Multi-Carrier Adaptive Bandwidth Control (up to 2+0)
  • Protection: 1+1/2+2 HSB
  • High spectral utilization: QPSK to 2048 QAM w/ACM
  • XPIC
  • 2×2 / 4×4 MIMO
SYNCHRONIZATION

Synchronization Distribution

  • Sync Distribution over any traffic interface (GE/FE)
  • Sync-E (ITU-T G.8261, G.8262)
  • SSM/ESMC Support for ring/mesh applications (ITU-T G.8264)
  • Sync-E Regenerator mode, providing PRC grade (ITU-T G.811) performance for
    smart pipe applications.
    IEEE-1588
    • Optimized Tran
ETHERNET

Ethernet Interfaces

  • Traffic Interfaces – 1 x 10/100/1000Base-T (RJ-45) and 1x1000base-X (SFP) or 10/100/1000 Base-T (electrical SFP)
  • Management Interface – 1 x 10/100 BaseT (RJ-45)
  • Optical SFP Types – Optical 1000Base-LX (1310 nm) or SX (850nm)

Note: SFP devices must

Ethernet Features

  • MTU – 9600 Bytes
  • Quality of Service
    • Multiple Classification criteria (VLAN ID, p-bits, IPv4, DSCP, IPv6 TC, MPLS EXP)
    • 8 priority queues
    • Deep buffering (configurable up to 64 Mbit per queue)
    • WRED
    • Hierarchical QoS – high service granularity*
    • P-bit marking/remarking
  • 4K VLANs
  • VLAN add/remove/translate
  • Frame Cut Through – controlled latency and PDV for delay sensitive applications
  • Header De-Duplication – Capacity boosting by eliminating inefficiency in all layers (L2, MPLS, L3, L4, Tunneling – GTP for LTE, GRE)
  • Network Resiliency – G.8032 and Multiple Spanning Tree Protocol (MSTP)*
  • Ethernet OAM – EFM (IEEE 802.3ah), CFM (IEEE 802.1ag), ITU-T Y.1731*
STANDARD

MEF

  • Carrier Ethernet 2.0 (CE 2.0)**

Supported Ethernet Standards

  • 10/100/1000base-T/X (IEEE 802.3)
  • Ethernet VLANs (IEEE 802.3ac)
  • Virtual LAN (VLAN, IEEE 802.1Q)
  • Class of service (IEEE 802.1p)
  • Provider bridges (QinQ – IEEE 802.1ad)
  • Link aggregation (IEEE 802.3ad)
  • Auto MDI/MDIX for 1000baseT
  • RFC 1349: IPv4 TOS
  • RFC 2474: IPv4 DSCP
    • RFC 2460: IPv6 Traffic Classes

Standards Compliance

  • EMC: EN 301 489-1, EN 301 489-4, Class B (Europe), FCC 47 CFR, part 15, class B (US), ICES-003, Class B (Canada), TEC/EMI/TEL-001/01, Class B (India)
  • Surge: EN61000-4-5, Class 4 (for PWR and ETH1/PoE ports)
  • Safety: EN 60950-1, IEC 60950-1, UL 60950-1, CSA-C22.2 No.60950-1, EN 60950-22, UL 60950-22, CSAC22.2.60950-22
  • Ingress Protection: IP66-compliant
  • Storage: ETSI EN 300 019-1-1 Class 1.2
  • Transportation: ETSI EN 300 019-1-2 Class 2.3
TECHNICAL SPECIFICATION

Mechanical Specifications

  • Dimensions: 230mm(H), 233mm(W), 98mm(D), 6.5kg
  • Pole Diameter Range (for Remote Mount Installation): 8.89 cm – 11.43 cm

Environmental Specifications

  • -33°C to +55°C (-45°C to +60°C extended)

Power Input Specifications

  • Standard Input: -48 VDC
  • IDU DC Input range: -40 to -60 VDC

Power Consumption Specifications

  • Maximum Power Consumption (2+0 Operation) 6 GHz: 65W; 7 GHz: 75W; 11 GHz: 65W; 13-15 GHz: 55W; 18-24 GHz: 48W; 26-38 GHz: 55W

PoE Injector Mechanical Specifications

  • Dimensions – 134mm(H), 190mm(W), 62mm(D), 1 kg

PoE Injector Environmental Specifications

  • 33°C to +55°C (-45°C to +60°C extended)

PoE Injector Power Input Specifications

  • Standard Input: -48 or +24 VDC (Optional)
  • DC Input range: ±(18/40.5 to 60) VDC (+18VDC extended range is supported as part of the nominal +24VDC support)

PoE Injector Interfaces

  • GbE Data Port supporting 10/100/1000Base-T
  • Power-Over-Ethernet (PoE) Port
  • DC Power Port –40V to -60V (a PoE supporting two redundant DC feeds each supporting ±(18-60)V is available)

Note:

* Planned for future release.
** Certification pending.